Quest Minivan SE V6-3.3L (VG33E) (1999)
/Page-350001.png)
Timing Belt: Service and Repair
Removal
CAUTION:
^
Do not bend or twist timing belt. After removing timing belt, do not turn crankshaft and camshaft separately because valves will strike piston
heads.
^
Make sure that timing belt, camshaft sprocket, crankshaft sprocket and belt tensioner are clean and free from oil and water.
^
Installation should be carried out when engine is cold.
1. Jack up the vehicle front and support with safety stand
2. Remove engine under cover.
3. Remove front RH wheel and engine side cover.
4. Drain engine coolant from radiator. Refer to Cooling System.
5. Remove the following belts.
^
Compressor drive belt
^
Generator drive belt
^
Power steering pump drive belt
