nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
On Board Diagnosis Logic|Page 7286 > < On Board Diagnosis Logic

Quest Minivan SE V6-3.3L (VG33E) (1999)

Page 1
background image

Control Module: Testing and Inspection
DTC Confirmation Procedure

NOTE:  If "DTC Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 5 seconds before
conducting the next test.

With Consult

1. Turn ignition switch ON and select "DATA MONITOR" mode for A/T with CONSULT.
2. Start engine.
3. Run engine for at least 2 seconds at idle speed.

On Board Diagnosis Logic|Page 7286 > < On Board Diagnosis Logic