Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
/Page-1958002.png)
^
from sliding door control unit terminal (7).
When the back door lock actuator (door unlock sensor) is UNLOCKED, ground is supplied:
^
to smart entrance control unit terminal (44)
^
through back door lock actuator (door unlock sensor) terminal (3) (with normal glass), or terminal (4) (with glass hatch)
^
to back door lock actuator (door unlock sensor) terminal (4) (with normal glass), or terminal (3) (with glass hatch)
^
through body ground B104.
Remote controller signal is input:
^
through window antenna
^
to smart entrance control unit terminal (55).
The multi-remote control system controls operation of the:
^
power door locks
^
interior lamps
^
panic alarm
^
ID code entry.
OPERATING PROCEDURE
Power door locks operation
When the following signals are both supplied:
^
key switch OFF (when ignition key is not inserted in ignition key cylinder);
^
door switches CLOSED (when all the doors are closed); smart entrance control unit locks all the doors with input of LOCK signal from
remote controller. When key switch is OFF (when ignition key is not inserted in the ignition key cylinder), smart entrance control unit
unlocks all the doors with input of UNLOCK signal from remote controller. Pressing UNLOCK once will unlock the driver's door,
pressing UNLOCK again within 5 seconds will unlock the other doors. The doors may also be locked and unlocked in a similar manner
using the door key. Refer to "POWER DOOR LOCK" and "THEFT WARNING SYSTEM".
Interior lamps operation
When the following input signals are both supplied:
^
key switch OFF (when ignition key is not inserted in ignition key cylinder);
^
door switches CLOSED (when all the doors are closed); smart entrance control unit turns on interior lamps (for 30 seconds) with input of
UNLOCK signal from remote controller. For detailed description, refer to "Interior, Map, Personal, Step and Tailgate Lamps/System
Description".
Panic alarm operation
The smart entrance control unit turns on and off horn, headlamps, side marker lamps, tail lamps and license lamps intermittently with the input of a
PANIC ALARM signal from the remote controller. For detailed description, refer to "System Description", "THEFT WARNING SYSTEM".
Door lock verification
When the following input signals are all supplied:
^
key switch OFF (when ignition key is not inserted in ignition key cylinder);
^
door switches CLOSED (when all the doors are closed);
^
door lock actuator (door unlock sensor) LOCKED (when all the doors are locked); smart entrance control unit outputs the following
ground signals with input of LOCK signal from remote controller:
^
to horn relay terminal (1)
^
through smart entrance control unit terminal (18)
^
to tail lamp relay terminal (1)
^
through smart entrance control unit terminal (37)
^
to all interior illumination lamps
^
through smart entrance control unit terminal (15).
As a result, horn relay and tail lamp relay are energized and the horn, side marker lamps, tail lamps, license lamps, and interior illumination lamps
turn on and off.
