Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
ID Code Entry Procedure
Enter the identity (ID) code manually when:
^
remote controller or control unit is replaced.
^
an additional remote controller is activated.
ID Code Entry Procedure
To enter the ID code, follow the procedures in the image.
NOTE:
^
If you need to activate more than two additional new remote controllers, repeat the procedure "Additional ID code entry" for each new remote
controller.
^
If the same ID code that exists in the memory is input, the entry will be ignored.
^
Entry of maximum of four ID codes is allowed and any attempt to enter more will be ignored.