Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
6. Disconnect and separate brake lines and move away from actuator.
NOTE: It is not necessary to remove these lines from vehicle.
7. Disconnect top four brake lines from actuator. (Lines from actuator to wheels).
8. Remove/loosen mounting nuts between actuator and bracket.
9. Remove the actuator grounding screw.
10. Draw out actuator as shown.
11. Reverse procedure to install, noting the following:
-
Refill brake fluid and bleed air. Refer to Brake Bleeding.