Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
/Page-558002.png)
1. Use a scraper to remove old liquid gasket from water outlet housing.
2. Apply a continuous bead of liquid gasket to mating surface of water outlet housing.
-
Use Genuine RTV Silicone Sealant Part No. 999 MP-A7007, Three Bond TB1207-D or equivalent.
3. Install thermostat with jiggle valve or air bleeder at upper side.
4. Install water outlet housing.
5. Install water hose to water outlet housing.
6. Refill engine coolant. After installation, run engine for a few minutes, and check for leaks.
