Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
/Page-2016001.png)
Audible Warning Device: Description and Operation
The warning chime is controlled by the smart entrance control unit.
Power is supplied at all times:
^
through 7.5 A fuse (No. (41), located in the fuse and fusible link box)
^
to smart entrance control unit terminal (9).
Power is also supplied at all times:
^
through 15 A fuse (No. (21), located in the fuse block)
^
to warning chime terminal (1).
With the ignition switch in the ON or START position, power is supplied:
^
through 10 A fuse (No. (30), located in the fuse block)
^
to smart entrance control unit terminal (25).
Ground is supplied to smart entrance control unit terminal (20) through body grounds M5, M78 and M123.
When a signal, or combination of signals, is received by the smart entrance control unit, ground is supplied:
^
through smart entrance control unit terminal (12)
^
to warning chime terminal (2).
With power and ground supplied, the warning chime will sound.
Ignition key warning chime
With the key in the ignition switch, in the OFF or ACC position and the driver's door open, the warning chime will sound. Ground is supplied:
^
from key switch terminal (1)
^
to smart entrance control unit terminal (14), and
^
from front door switch LH terminal (2)
^
to smart entrance control unit terminal (5).
Front door switch LH is grounded through body ground.
Key switch terminal (2) is grounded through body grounds E3, E14 and E53.
Light warning chime
With ignition switch in OFF or ACC position, driver's door open and lighting switch in 1ST or 2ND position, the warning chime will sound.
Ground is supplied:
^
to smart entrance control unit terminal (5)
^
from front door switch LH terminal (2), and
^
to smart entrance control unit terminal (37)
^
from lighting switch terminal (5).
Front door switch LH is grounded through body ground.
Lighting switch terminal (5) is grounded through body grounds M5, M78 and M123.
Seat belt warning chime
With ignition switch turned ON and seat belt unfastened (seat belt switch ON), warning chime will sound for approximately 6 seconds.
Ground is supplied:
^
to smart entrance control unit terminal (32)
^
from seat belt switch terminal (1).
Seat belt switch terminal (2) is grounded through body grounds M5, M78 and M123.
