Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
Crankshaft Position Sensor: Testing and Inspection
COMPONENT INSPECTION
Crankshaft position sensor (OBD)
1. Disconnect crankshaft position sensor (OBD) harness connector.
2. Loosen the fixing bolt of the sensor.
3. Remove the sensor.
4. Visually check the sensor for chipping.
5. Check resistance as shown in the figure.
Resistance: Approximately 432 - 528 Ohms [at 25°C (77°F)]
If NG, replace crankshaft position sensor (OBD).