Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
Bolt length, number and location are shown in the illustration.
-
Be careful not to drop manual valve and servo release accumulator return spring.
7. Disassemble and inspect control valve assembly if necessary.
8. Remove servo release and N-D accumulators by applying compressed air if necessary.
-
Hold each piston with a rag.
INSTALLATION
-
Set manual shaft in Neutral, then align manual plate with groove in manual valve.
-
After installing control valve assembly, make sure that selector lever can be moved to all positions.