Rogue 2WD L4-2.5L (QR25DE) (2008)
3. Operate the power window main switch to raise or lower the door window until the glass mounting bolts can be seen.
4. Remove the glass mounting bolts.
5. Raise up the door glass and hold with a suction lifter (A).
6. Disconnect the harness connector for the module assembly.
7. Remove the mounting bolts, and pull out the module assembly.
8. Disengage the harness clip from the back of the module assembly, and then remove the module assembly.
INSTALLATION
Install in the reverse order of removal.