Rogue 2WD L4-2.5L (QR25DE) (2008)
2. Disconnect connector (A) and from sunroof motor assembly. Remove sunroof motor assembly mounting TORX bolt (B), and then remove sunroof
motor assembly (1).
INSTALLATION
CAUTION: Before installing the sunroof motor assembly, be sure to the place the link and wire assembly in the symmetrical and fully closed
position.
1. Move the sunroof motor assembly laterally by little so that the gear is completely engaged into the wire on the sunroof unit assembly and mounting
surface becomes parallel. Then secure the sunroof motor assembly with TORX bolt.
2. Install the headlining.