Rogue 2WD L4-2.5L (QR25DE) (2008)
/Page-1873002.png)
1. Remove the wind deflector.
^ Refer to the Electronic Service Manual (ESM) as needed.
2. Install the new wind deflector.
^ Refer to the ESM as needed.
3. Attach the tethers with the supplied TORX screws.
^ Torque the screws to 1.2 - 1.8 Nm (0.12 - 0.18 kg-m, 11 - 16 in lbs).
^ Figure 1 shows the driver side tether.
^ Figure 2 shows one of the screws installed.
