Rogue 2WD L4-2.5L (QR25DE) (2008)
Seat Back: Service and Repair
Rear Seat
Disassembly and Assembly
SEATBACK
Disassembly
1. Remove the seatback side bracket.
-
Remove the mounting bolt (A), and then remove seatback side bracket.
2. Remove the seatback trim and seatback pad.
-
Turn seatback lock knob counterclockwise to remove.
-
Remove the clips and pawl, and the seatback lock finisher.
-
Remove the seatback trim and seatback pad from the seatback frame.
-
Remove the hog rings to separate the seatback trim and seatback pad.
3. Remove the seatback silencer.
4. Remove the seatback lock assembly.
-
Remove the mounting bolt (A), and then remove seatback lock assembly.
Assembly
Assemble in the reverse order of disassembly.
CAUTION: Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with the seatback frame and pad