Rogue 2WD L4-2.5L (QR25DE) (2008)
-
Remove the metal clips and pawls, and then pull out seat cushion outer finisher.
-
Disconnect the harness connectors.
2. Remove the seat belt buckle.
3. Remove the seat cushion inner finisher.
-
Remove the screw (A).
-
Remove the metal clips and pawls, and then pull out seat cushion inner finisher.
4. Remove the seat cushion trim and seat cushion pad. (Without occupant classification system control unit model)
-
Remove the seat cushion retainer.
-
Disconnect the heater unit harness connector.
-
Remove the seat cushion trim and seat cushion pad from the seat frame assembly.
-
Remove the hog rings, and separate the seat cushion trim and seat cushion pad.
5. Remove the seat slide outer finisher. (Lifter seat only)
-
Remove the screw (A).
-
Remove the metal clips, and then pull out seat slide outer finisher.
6. Remove the seat cushion front finisher. (Power seat only)