Rogue 2WD L4-2.5L (QR25DE) (2008)
BR-21 Exploded View
FRONT: Removal and Installation
REMOVAL
CAUTION: Never spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it off immediately and wash
with water if it gets on a painted surface.
1. Remove tires with power tool.
2. Drain brake fluid.
3. Loosen the flare nut with a flare nut wrench and separate the brake tube from the hose.
CAUTION:
^
Never scratch the flare nut and the brake tube.
^
Never bend sharply, twist or strongly pull out the brake hoses and tubes.
^
Cover open end of brake tubes and hoses when disconnecting to prevent entrance of dirt.
4. Remove the union bolt and copper washers, and remove the brake hose from the brake caliper assembly.
5. Remove the lock plate and remove the brake hose.
INSTALLATION
CAUTION: Never spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it off immediately and wash
with water if it gets on a painted surface.
1. Assemble the union bolt and the copper washers to the brake hose.