Rogue 2WD L4-2.5L (QR25DE) (2008)
4. Remove anti-rattle pins, springs, and return springs.
CAUTION: Never drop the removed parts.
5. Remove brake strut, adjuster, parking brake shoes and toggle lever.
CAUTION:
^
The parking brake shoes for the front side are made of different materials from those for the rear side. Never misidentify them when
removing.
^
Never drop the removed parts.
INSTALLATION
Install in the reverse order of removal.
^
Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease to the back plate and brake shoe.
CAUTION: The parking brake shoes for the front side are made of different materials from those for the rear side. Never misidentify
them when removing and replacing.
^
Assemble adjusters so that threaded part is expanded when rotating it in the direction shown by arrow.
A: For RH brake
B: For LH brake
<---: Vehicle front
<---: Adjuster expands
^
Shorten adjuster by rotating it.
^
When disassembling, apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease to threads.
^
Check parking brake shoe sliding surface and drum inner surface for grease. Wipe it off if it adhere on the surfaces.