nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Oil Cooler, Engine > < For North America|Page 2106
Page 1
background image

Engine Oil: Service and Repair

Draining

WARNING: 
^

Be careful not to get burn yourself, as engine oil may be hot. 

^

Prolonged and repeated contact with used engine oil may cause skin cancer. Try to avoid direct skin contact with used engine oil. If skin
contact is made, wash thoroughly with soap or hand cleaner as soon as possible.

1. Warm up the engine, and check for engine oil leakage from engine components. Refer to LU-5, "Inspection". See: Testing and Inspection
2. Stop the engine and wait for 10 minutes.
3. Loosen oil filler cap.

4. Remove drain plug (1) and then drain engine oil.

<---: Vehicle front

Refilling

1. Install drain plug with new washer. 

CAUTION: Be sure to clean drain plug and install with new washer.

Tightening torque: Refer to EM-33, "Exploded View". See: Oil Pan/Service and Repair/Oil Pan (Lower)

2. Refill with new engine oil.

CAUTION: 
^

The refill capacity depends on the engine oil temperature and drain time. Use these specifications for reference only.

^

Always use oil level gauge to determine the proper amount of engine oil in engine.

3. Warm up the engine and check area around drain plug and oil filter for engine oil leakage.
4. Stop the engine and wait for 10 minutes.
5. Check the engine oil level. Refer to LU-5, "Inspection". See: Testing and Inspection

Oil Cooler, Engine > < For North America|Page 2106