Rogue 2WD L4-2.5L (QR25DE) (2008)
3. Remove mounting nut (A), and lower dash insulator (1) a position without the hindrance for work (as shown in the figure).
4. Remove mounting bolt (A), and then disconnect high-pressure pipe (1) from expansion valve.
CAUTION: Cap or wrap the joint of the A/C piping and expansion valve with suitable material such as vinyl tape to avoid the entry of
air.
5. Remove high-pressure pipe (1) from vehicle clips (A).
6. Remove mounting bolt (A), and then remove high-pressure pipe (1) from condenser.
CAUTION: Cap or wrap the joint of the A/C piping and condenser with suitable material such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION: