Rogue 2WD L4-2.5L (QR25DE) (2008)
-
Pull (A) the tube and the connector to check that they are securely connected.
Inspection Hole Cover
-
Before installing inspection hole cover, check that the connecting part has no fuel leakage.
1. Install inspection hole covers with the front mark (arrow) facing front of vehicle.
2. Lock clips by turning counterclockwise.
2WD : Inspection
INSPECTION AFTER INSTALLATION
Use the following procedure to check for fuel leakage.
1. Turn ignition switch "ON" (with engine stopped), then check connections for leakage by applying fuel pressure to fuel piping.
2. Start engine. Then let it idle and check that there is no fuel leakage at the fuel system connections.