Rogue 2WD L4-2.5L (QR25DE) (2008)
/Page-738006.png)
20. When the screen in Figure 7 appears, ECM reprogramming is complete.
NOTE:
^ For recovery reprogramming, the "ECU Information" will display the same part number for both the "Old Part#" and the "New Part#".
^ If you cannot print the above screen:
a. Select the Print icon.
b. Select Save.
c. Select OK.
A copy of the screen is now saved in the C-III computer.
Erase DTCs from all systems
NOTE:
