nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Campaign P9249 - ECM/TCM Update For A/T Rattle|Page 3125 > < Campaign P9249 - ECM/TCM Update For A/T Rattle|Page 3123
Page 9
background image

b. Confirm Transmission temperature is 50 to 80°C (122 to 176°F).

5. With engine at idle, move the shift selector to each gear and then back to Park.

6. Remove the dipstick from the transmission fill tube.

^ Push the tab to release the dipstick lock.

7. Wipe the dipstick clean with lint-free paper (do not use a cloth).

8. Install the dipstick 180° from the locked position as shown.

^ Make sure it is all the way in.

9. Remove the dipstick.

10. Make sure the fluid level is at correct range as shown.

Campaign P9249 - ECM/TCM Update For A/T Rattle|Page 3125 > < Campaign P9249 - ECM/TCM Update For A/T Rattle|Page 3123