Rogue 2WD L4-2.5L (QR25DE) (2008)
Fuel Injector: Service and Repair
FUEL INJECTOR AND FUEL TUBE
EM-41 Exploded View
CAUTION: Never remove or disassemble parts unless instructed in the figure.
Removal and Installation
REMOVAL
WARNING:
^
Put a "CAUTION: FLAMMABLE" sign in the work shop.
^
Be sure to work in a well ventilated area and furnish work shop with a CO2 fire extinguisher.
^
Never smoke while servicing fuel system. Keep open flames and sparks away from the work area.
1. Release fuel pressure. Refer to EC-486, "Inspection".
2. Remove air cleaner case, mass air flow sensor and air duct assembly.
3. Disconnect quick connector (A) with the following procedure:
1: Fuel feed hose
<---: Vehicle front
CAUTION: Disconnect quick connector by using quick connector release, not by picking out retainer tabs.