Rogue 2WD L4-2.5L (QR25DE) (2008)
/Page-1022007.png)
During reprogramming DTCs will set in several systems. DTCs must be erased from all systems.
21. Click on the "Home" icon (top left corner of the C-III screen).
22. Wait for the "Detecting VI/MI in progress" message to clear.
23. Select the detected VI from the list.
24. Select Connect.
25. Wait for the "Checking the firmware version" message to clear.
26. Select Rogue or Versa and the correct model year.
27. Select Select
28. Make sure the correct vehicle is displayed on the confirmation screen.
29. Select Diagnosis
30. Wait for System Call to complete and CAN Diagnosis to reach 51%.
When the CAN diagnosis reaches 51%, the process icons in the Process Guide Area at the top of the screen will light (become enabled).
