Rogue 2WD L4-2.5L (QR25DE) (2008)
INSPECTION AFTER INSTALLATION
-
Check that accelerator pedal moves smoothly within the whole operation range when it is depressed fully and released.
-
Check that accelerator pedal returns securely to the fully released position.
-
For the electrical inspection of accelerator pedal position sensor. Refer to EC-392, "Description". See: Computers and Control Systems/Testing
and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/P Code Charts/P2138
CAUTION: When harness connector of accelerator pedal position sensor is disconnected, perform "ACCELERATOR PEDAL
RELEASED POSITION LEARNING". Refer to EC-27, "ACCELERATOR PEDAL RELEASED POSITION LEARNING : Description"
(for California), EC-929, "ACCELERATOR PEDAL RELEASED POSITION LEARNING : Description" (for Mexico) or EC-501,
"ACCELERATOR PEDAL RELEASED POSITION LEARNING : Description" (Except for California and Mexico). See: Computers and
Control Systems/Testing and Inspection/Programming and Relearning/Accelerator Pedal Released Position Learning