Rogue 2WD L4-2.5L (QR25DE) (2008)
Install in the reverse order of removal.
CAUTION:
-
Do not damage the harness while installing.
-
In the case that a malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function and delete the memory by
CONSULT-III.
-
In the case that a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions.
-
After the work is completed, check that no system malfunction is detected by air bag warning lamp. Refer to SRC-18, "Diagnosis
Description". See: Restraint Systems/Air Bag Systems/Testing and Inspection/Scan Tool Testing and Procedures/Diagnosis System (Airbag)
ECU DISCRIMINATED NO.
After replacing the diagnosis sensor unit, confirm that the diagnosis sensor unit identification is correct for the vehicle as equipped.