Rogue 2WD L4-2.5L (QR25DE) (2008)
/Page-1677002.png)
OCS Varistor Check Tool Kit - J-49787
^
Additional tools can be ordered from TECH-MATE.
MAT Cable Information and Instructions:
The MAT cable is good for only 100 connections (50 for each end).
^
MAT cable P/N - 551243
^
Cable end connectors are identical (interchangeable)
The MAT cable ends have identifying marks which allow the user to keep track or how many times each end has been used.
^
One end of the cable is marked with a "Blue Band" as shown.
^
One end is "Plain" as shown.
^
A "Usage Card" is included with each tool kit and with each replacement MAT cable.
Each time the tool is used, fill in one of the squares on the Usage Card.
^
One side of the card has 50 squares for the Blue Band End of Cable.
^
The other side of the card has 50 squares for the Plain End of Cable.
1.
Plug one end of the MAT cable into the MAT port on the Varistor Test Tool.
2.
Leave this end plugged into the tool until one side of the Usage Card is full.
^
Do not unplug the MAT cable from the test tool between each vehicle inspection.
3.
When one side of the usage card is full, (all 50 squares are filled) switch ends of the MAT cable.
4.
When both sides of the Usage Card are full, replace the MAT cable with a new one.
^
Replacement MAT cables (P/N - 551243) are available from TECH-MATE.
Testing the Varistor Test Tool
