Rogue 2WD L4-2.5L (QR25DE) (2008)
Steering Shaft: All Technical Service Bulletins
Steering - Squeak When Turning Steering Wheel
Classification: ST10-003
Reference: NTB10-074
Date: June 8, 2010
2008 ROGUE; NOISE WHEN TURNING STEERING WHEEL
APPLIED VEHICLES: 2008 Rogue (S35)
IF YOU CONFIRM
There is a squeaking or rubbing noise when the steering wheel is turned
and
The noise can be isolated to the steering rack pinion shaft column seal (dash seal).
ACTION
Replace the column seal (dash seal)
^ DO NOT remove the steering column assembly or Intermediate shaft to replace the seal.
^ See the Service Procedure in this bulletin for details.
NOTE
Do not replace the Steering column assy., Intermediate shaft, or Steering rack for this incident, if it ,should occur.
IMPORTANT:
The purpose of "ACTION" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.