Rogue 2WD L4-2.5L (QR25DE) (2008)
Transmission Speed Sensor: Service and Repair
Secondary Speed Sensor
SECONDARY SPEED SENSOR
TM-192 Exploded View
Removal and Installation
REMOVAL
1. Disconnect the battery cable from negative terminal.
2. Disconnect secondary speed sensor connector.
3. Remove secondary speed sensor (1) and shim (2).
CAUTION: Never lose the shim.
4. Remove O-ring (3) from secondary speed sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
^
Never reuse O-ring.
^
Apply CVT fluid to O-ring.
Inspection