Rogue 2WD L4-2.5L (QR25DE) (2008)
Rear Door Window Glass: Adjustments
INSPECTION AND ADJUSTMENT
FITTING INSPECTION
-
Check that the glass is fit securely into the sash groove.
-
Lower the glass slightly [approximately 10 to 20 mm (0.394 to 0.787 in)], and check that the clearance to sash is parallel. Loosen the regulator
mounting bolts, guide rail mounting bolts, and glass and carrier plate mounting bolts to correct the glass position if the clearance between the glass
and sash is not parallel.