Recall R0906 - Steering Gear Housing Cover Screw - Page 5463
d. Final torque - tighten clamp to 3.5 Nm (0.35 Kg-m, 31 in lb)
9. Reposition the dust cover.
^ Make sure the top edge of the dust cover aligns with the grove on the pinion shaft.
d. Final torque - tighten clamp to 3.5 Nm (0.35 Kg-m, 31 in lb)
9. Reposition the dust cover.
^ Make sure the top edge of the dust cover aligns with the grove on the pinion shaft.