Rogue 4WD L4-2.5L (QR25DE) (2009)
Transmission Position Switch/Sensor: Service and Repair
Removal And Installation
PARK/NEUTRAL POSITION (PNP) SWITCH
Removal and Installation
REMOVAL
1. Remove battery and battery bracket. Refer to See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Exploded View.
2. Remove PNP switch connector.
3. Remove control cable. Refer to See: Shift Linkage/Service and Repair/Exploded View.
4. Remove clip (Dark Arrow).
5. Remove PNP switch from transaxle assembly.
INSTALLATION
Install in the reverse order of removal.