Rogue 4WD L4-2.5L (QR25DE) (2009)
Power Window Switch: Service and Repair
Removal And Installation
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2). Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair/Exploded View and See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Removal and Installation.
2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.
CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH and RH).
INSTALLATION
Install in the reverse order of removal.
NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to See: Testing and
Inspection/Programming and Relearning/Additional Service When Removing Battery Negative Terminal/Special Repair Requirement.