Sentra L4-1.8L (QG18DE) (2004)
4.
Write the "To" number on the Repair Order.
5.
Click on "Continue" and follow directions to perform "data transfer" (download) the data from ASIST into CONSULT-II.
Step Two: Preparation Steps Before Reprogramming ECM
1.
Connect a battery charger to the vehicle's battery.
Set the charger to a low charge rate (trickle charge).
CAUTION:
For steps 2 and 3, DO NOT connect the CONSULT-II A/C Power Supply
(see Figure B).
2.
Press [SUB MODE] (see Figure C) then:
a.
From the listed items, find and select [BATTERY CHARGE].