Sentra L4-1.8L (QG18DE) (2004)
CAUTION:
You must leave the vehicle and the CONSULT-II unit "undisturbed" (don't touch) until reprogramming is complete.
NOTE:
If CONSULT-II screen gives you an error message "Unmatch of Vehicle Data":
^ You tried to reprogram with an incorrect data file, or
^ You are trying to reprogram with a file that is already in the ECM.
27. When the Reprogramming is complete, CONSULT-II will "beep", turn the screen backlight back ON and automatically print out a report (see Figure
19).
^ Remember it may take up to 20 minutes.
^ Attach the print-out to the repair order for future reference.
CAUTION
If CONSULT-II prints "REPROGRAMMING UNEXPECTEDLY TERMINATED":
^ The ECM has been permanently damaged and will require replacement.
^ In this case, perform steps A through G under "REPROGRAMMING UNEXPECTEDLY TERMINATED".
Do not start the engine with the damaged ECM installed.