Sentra L4-1.8L (QG18DE) (2004)
Air Bag(s) Arming and Disarming: Service and Repair
Precautions for SRS "AIR BAG" and "SEAT BELT PRE-TENSIONER" Service
-
Before servicing the SRS, turn ignition switch "OFF", disconnect both battery cables and wait at least 3 minutes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not
work on any SRS connectors or wires until at least 3 minutes have passed.
-
Do not use electrical test equipment to check SRS circuits unless instructed.
For final checking after repairing SRS without using CONSULT-II, go to Diagnostic Procedure 1 See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Diagnostic Procedures/Air Bag
System/Diagnostic Test Procedures
For final checking after repairing SRS by using CONSULT-II, go to Diagnostic Procedure 3. See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Diagnostic Procedures/Air Bag
System/Diagnostic Test Procedures/Diagnostic Procedure 3