Sentra L4-1.8L (QG18DE) (2004)
Lay control valve body down when installing valves. Do not stand the control valve body upright.
1. Lubricate the control valve body and all valves with ATF. Install control valves by sliding them carefully into their bores.
^
Be careful not to scratch or damage valve body.
^
Wrap a small screwdriver with vinyl tape and use it to insert the valves into their proper positions.
1-2 ACCUMULATOR VALVE
^
Install 1-2 accumulator valve. Align 1-2 accumulator retainer plate from opposite side of control valve body.
^
Install return spring, 1-2 accumulator piston and plug.
1. Install retainer plates.
^
Install retainer plate while pushing plug or return spring.
RETAINER PLATE (FOR CONTROL VALVE UPPER BODY)