Sentra L4-1.8L (QG18DE) SULEV (2003)
Electronic Throttle Actuator: Testing and Inspection
Component Inspection
THROTTLE CONTROL MOTOR
1. Disconnect electric throttle control actuator harness connector.
2. Check resistance between terminals 3 and 6.
Resistance: Approximately 1 - 15 Ohm [at 25 °C (77 °F)]
3. If NG, replace electric throttle control actuator and go to next step.
4. Perform "Throttle Valve Closed Position Learning"
5. Perform "Idle Air Volume Learning".