Sentra L4-1597cc 1.6L DOHC MFI (GA16DE) (1991)
Maxima
VG30E (2)
1986
Front side, first plug
6 o'clock
& later
from driver side.
200SX
VG30E
1987
Driver side, first
6 o'clock
& later
plug from the rear.
Stanza
CA20E
1987
Front side, second
7 o'clock
Wagon
& later
plug from driver side.
Stanza
CA20E
1989
Front side, first plug
7 o'clock
Sedan
& later
from driver side.
Sentra
E16 (3)
1987-1988
Rear side, first plug
8 o'clock
Pulsar
from passenger side.
Sentra
GA16i (3)
1989
Front side, first plug
10 o'clock
Pulsar NX
GA16DE (3)
& later
from passenger side.
Pulsar
CA16DE
1987
Front side, first plug
5 o'clock
CA18DE
& later
from driver side.
(1)
Remove exhaust pipe heat shield and steering column lower joint assembly for access to indicated freeze plug. Remove section of exhaust pipe
connected to turbocharger if necessary.
(2)
Remove front section of exhaust pipe for access to indicated freeze plug.
(3)
Remove alternator for access to indicated freeze plug.
KIT CONTENTS:
Item No.
Qty
Item
1
1
Heater assembly
2
1
Power cord
3
1
Power cord end protector cap
4
3
Tie wrap
5
1
Installation instructions
TOOLS REQUIRED:
Center punch
Combination pliers
Hammer
4 mm hex wrench
Needle nose pliers
Flat blade screwdriver
INSTALLATION PRECAUTIONS/NOTES:
^
Do not over torque engine block heater.
^
Ensure that power cord doesn't contact exhaust pipes, sharp edges or vehicle moving parts.
^
Torque removed vehicle parts to proper specifications (refer to appropriate Nissan Service Manual).
PART NUMBER:
999M1-49000
APPLICATION
MODEL
ENGINE TYPE
YEAR
LOCATION
ELEMENT
DIRECTION
-----------------------------------------------------------------------------------------------------------------
240SX
KA24E
1989
Driver side of the
12 o'clock
& later
engine, first plug
from the rear.
Axxess
KA24E
1990
Front side of the
12 o'clock
Stanza
& later
engine, first plug
from the driver side.
Truck (1)
KA24E
1990
Driver side of the
12 o'clock
(4 cyl/
& later
engine, first plug
2WD)
from the rear.
(1)
Remove section of exhaust pipe in front of indicated freeze plug to facilitate block heater installation.