Sentra L4-1597cc 1.6L DOHC MFI (GA16DE) (1991)
Bolt Length, Number And Location
3. Remove control valve assembly by removing fixing bolts.
-
Be careful not to drop manual valve out of valve body.
4. Disassemble and inspect control valve assembly if necessary - Refer to "REPAIR FOR COMPONENT PARTS".
5. Remove accumulator by applying compressed air if necessary.
-
Hold piston with a rag.
INSTALLATION
-
Set manual shaft in Neutral, then align manual plate with groove in manual valve.
-
Align throttle lever with groove in detent valve.
-
After installing control valve assembly to transmission case, make sure that selector lever can be moved to all positions.
-
Install any part removed.