Sentra L4-1597cc 1.6L SOHC (E16S) (1985)
Heat Shield: Customer Interest
Exhaust System - Buzz or Rattle
Reference:
TECHNICAL BULLETIN TS86-091 Date: May 30, 1986
Classification:
EC86-006 Section: Emission Control Models: 1982-1986 Federal Sentra/Pulsar NX
EXHAUST SYSTEM RATTLE, 1982-1986 FEDERALS SENTRA/PULSAR NX
APPLIED MODEL:
1982-1986 Sentra and 1983-1986 Pulsar NX (FEDERAL MODELS ONLY)
SERVICE INFORMATION
The exhaust system of some Federal Sentra and Pulsar NX models may exhibit a buzz or rattle noise. This noise is especially noticeable during the
engine warm-up period.
Use the following Parts Information and Service Procedure to replace the existing front exhaust tube heat shields (insulators) with new parts which
contain a graphite insulator at the areas where the heat shield is clamped to the exhaust pipe.
PARTS INFORMATION
PART DESCRIPTION
PART
QUANTITY REQUIRED
Heat Shield (Insulator)
20510-32A60
1
Heat Shield (Insulator)
20512-32A60
1
Heat Shield (Insulator)
20515-32A60
1
Heat Shield (Insulator)
20517-32A60
1
Nut
20602-32A00
6
Clamp
20561-32A00
3
Screw
08363-6202G
3
WARRANTY INFORMATION
CS
PNC
CT
OP CODE
FLAT RATE
4R
20510
12
DB28AA
0.7/hr.
-Exhaust System