Sentra L4-1597cc 1.6L SOHC (E16S) (1985)
specifications chart. The top float position can be adjusted by bending float seat. Upon completion of the adjustment, check fuel level with
attached level gauge.
2.
Adjust bottom float position so that clearance ``h'' between float seat and needle valve stem is as listed in the specifications chart when float is
fully raised. Bend float stopper as required.
3.
After adjustments in steps 1 and 2 above have been made, make sure that when fuel is delivered to the float chamber, the fuel level is maintained at
.75 inch, Fig. 5.