Sentra L4-2.0L (MR20DE) (2010)
8. Remove glove box lower finisher screws (A), remove glove box lower finisher (1).
9. Remove the glove box assembly a. Remove the two lower glove box assembly screws (A).
b. Open the glove box and remove the four upper glove box assembly screws (B).
Installation
Installation is in the reverse order of removal.
INSTRUMENT LOWER FINISHER
Removal
Remove instrument lower finisher screw, remove instrument lower finisher, disconnect diagnostic connector and hood release cable.
Installation
Installation is in the reverse order of removal.
CENTER CONSOLE ASSEMBLY
Removal