Sentra L4-2.0L (MR20DE) (2010)
7. Loosen and remove intake manifold (1) bolts (A) (B).
Arrow Indicates Engine front
8. Loosen bolts in reverse order as shown.
Arrow Indicates Engine front
CAUTION:
Cover engine openings to avoid entry of foreign materials.
9. Remove EVAP canister purge volume control solenoid valve from intake manifold, if necessary.
CAUTION:
Handle it carefully and avoid impacts.
10. Remove intake manifold.
11. Remove intake manifold adapter (for California).
INSTALLATION
1. Install intake manifold adapter (for California).
NOTE:
Be sure the intake manifold adapter gasket is seated correctly in groove of intake manifold adapter (for
California).
2. Install intake manifold.
NOTE:
Be sure the intake manifold gasket is seated correctly in groove of intake manifold (except for California).