Sentra L4-2.0L (MR20DE) (2010)
-
By referring to the figure, measure the valve clearances at locations marked "x" as shown in the table below [locations indicated with black arrow
(Black Arrow)] with a feeler gauge.
-
No. 1 cylinder compression TDC
c. Set No.4 cylinder at TDC of its compression stroke.
-
Rotate crankshaft pulley (1) one revolution (360 degrees) and align TDC mark (no paint) (B) to timing indicator (A) on front cover.
C : White paint mark (Not use for service)