Sentra L4-2.0L (MR20DE) (2010)
1. CAN communication status
-
CAN communication is normally performed with other control units.
-
Individual unit control by IPDM E/R is normally performed.
-
When sleep request signal is received from BCM, mode is switched to sleep waiting status.
2. Sleep waiting status
-
Process to stop CAN communication is activated.
-
All systems controlled by IPDM E/R are stopped. When 1 second has elapsed after CAN communication with other control units is stopped, mode
switches to sleep status.
3. Sleep status
-
IPDM E/R operates in low current-consumption mode.
-
CAN communication is stopped.
-
When a change in CAN communication signal is detected, mode switches to CAN communication status.
-
When a change in ignition switch signal is detected, mode switches to CAN communication status.