Sentra L4-2.0L (MR20DE) (2010)
Fuel Level Sensor Removal
1. Remove the fuel pump module assembly (module).
^ Refer to the appropriate section of the Electronic Service Manual (ESM), if needed.
NOTE:
Perform repairs in a clean work environment.
2. Remove the 3 wire terminals with red, white, and double-wire black wires from under the top of the module as shown in Figure 1 and 2.
NOTE:
The white wire may appear yellowish in color.
^ Press the tab in and then gently pull the wire off its terminal (see Figure 2)