Sentra L4-2.0L (MR20DE) (2010)
Steering Angle Sensor: Service and Repair
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
NOTE:
The steering angle sensor is and integrated part of the spiral cable and must be replaced as an assembly.
1. Remove the spiral cable. See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Perform the neutral position adjustment for the steering angle sensor. See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Programming and Relearning.