Sentra L4-2.0L (MR20DE) (2010)
PARTS INFORMATION
CLAIMS INFORMATION
Control Valve Assembly Replacement
Control Valve Assembly Replacement
1. Replace the CVT control valve assembly.
^ Use the new control valve assembly listed in the Parts Information.
^ Refer to the Transmission section in the appropriate Service Manual for control valve assembly replacement information.
^ Make sure TCM initialization is performed (separately or as part of the TCM reprogramming).
NOTE:
^ The transmission does not need to be removed for this procedure.
^ Transmissions are vulnerable to particles (dust, metal, lint, etc.).
^ When replacing a valve body, make sure your work environment (shop, workbench, etc.), the transmission area (sub-frame, oil pan, harness connector,
etc.), and your hands are free of contamination.
^ Make sure all parts are clean prior to installing on the vehicle. Unpack Service Parts just before installation.
TCM Reprogramming