nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Engine Controls - Engine Idle Speed 25RPM Too High|Page 10547 > < Engine Controls - Engine Idle Speed 25RPM Too High|Page 10545

Sentra L4-2.5L (QR25DE) (2003)

Page 1
background image

Valve Body: Service and Repair

Control Valve Assembly and Accumulators 

REMOVAL

1. Drain ATF from transaxle.
2. Remove oil pan and gasket.

^

Always replace oil pan bolts as they are self-sealing bolts.

3. Disconnect A/T solenoid harness connector.

4. Remove snap ring from terminal cord assembly harness terminal body.
5. Remove terminal cord assembly harness from transmission case by pushing on terminal body.

Engine Controls - Engine Idle Speed 25RPM Too High|Page 10547 > < Engine Controls - Engine Idle Speed 25RPM Too High|Page 10545