Sentra GXE L4-1.8L (QG18DE) (2000)
1. Attach the spacer to the tip of the radiator plate pliers A. Spacer specification: 1.5 mm (0.059 inch) thick x 18 mm (0.71 inch) wide x 8.5 mm
(0.335 inch) long.
2. Make sure that when radiator plate pliers A are closed dimension H" is approximately 7.6 mm (0.299 inch).
3. Adjust dimension H" with the spacer, if necessary.
DISASSEMBLY
1. Remove tank with Tool.
^
Grip the crimped edge and bend it upwards so that Tool slips off.
Do not bend excessively.
^
In areas where Tool cannot be used, use a screwdriver to bend the edge up.
Be careful not to damage tank.